A5 Desk Organizer Tray | Support-Free Document & EDC Dock

💎 To get the full library of 3D models with commercial use and Custom Orders, join our Patreon here: https://www.patreon.com/thegulzar3d

🗂️ A5 Desk Organizer Tray | Clean Paperwork, Clutter-Free Workflow

Ergonomic front grab-notch. Dedicated stationery sorting. 100% Support-Free.

Streamline your workspace with the A5 Desk Organizer Tray. Purpose-built to tame cluttered paperwork, journals, and daily desk tools, this low-profile caddy combines a dedicated A5 paper/notebook bay with two organized rear accessory compartments in one clean, unified footprint.

At 183 × 250 × 25 mm, the tray is scaled to cradle standard A5 stationery flat while maintaining a sleek, modern desktop presence. The front of the main tray features a wide, ergonomic finger-scoop cutout, allowing you to slide out single sheets, planners, sketchbooks, or tablets effortlessly without catching on the rim. The rear divider divides into two distinct storage zones to keep your writing instruments, notes, and loose hardware neatly arranged right behind your work documents.

📦 Compartment Breakdown & What Fits Inside (183 × 250 × 25 mm)

• 📖 Primary A5 Paper & Planner Bay: Sized to comfortably hold standard A5 paper sheets (148 × 210 mm), bound journals, Leuchtturm / Moleskine notebooks, iPad Mini, or e-readers flat with easy front retrieval.
• ✏️ Rear Utility Bay 1 (Wide): Holds everyday pens, mechanical pencils, highlighters, markers, and small drafting rulers.
• 📑 Rear Utility Bay 2 (Square): Perfect landing spot for 3" × 3" (76 × 76 mm) Post-it sticky notes, erasers, paperclips, binder clips, USB flash drives, or wireless earbuds.

✨ Key Design Features

• 🚫 100% Support-Free FDM Printing: Smart self-supporting draft angles, rounded internal fillets, and a flat bottom mean zero support material and zero post-processing.
• 🤲 Ergonomic Front Access Notch: Low-profile front cutout allows you to lift documents and sketchbooks with a single finger swipe.
• 🏢 Clean Architectural Silhouette: Thick, rounded outer rims and smooth internal transitions give the tray a high-end Scandinavian look that blends into modern office and creative studio desks.
• 🛡️ Ultra-Low Profile (25 mm Height): Slides easily into shallow desk drawers or sits unobtrusively on any desk mat or monitor riser.

📐 Dimensions & Specifications

• Width: 183 mm
• Length: 250 mm
• Height: 25 mm
• Format Compatibility: Engineered for standard A5 paper & notebook dimensions (148 × 210 mm).
• Layout: 1 Large Front A5 Document Bay + 2 Rear Accessory Storage Wells.
• Print Style: Monolithic single-piece solid print (zero assembly, ready to use right off the build plate).
• Bed Fit Guide:
• 256 × 256 mm beds and above (SPARKX i7, Bambu P1/X1/A1): Fits straight on the build plate.
• Standard 220 × 220 mm beds (Ender-3, Kobra 3): Rotate 45° diagonally across the build plate (diagonal span is ~311 mm), or scale slightly to 88% for a straight fit.

⚙️ Printing Settings

• Support: None Required.
• Design Note: All interior dividers and front grab-notches are drafted with self-supporting angles.
• Orientation: Print flat on its bottom face.
• Layer Height: 0.20 mm or 0.28 mm (0.28 mm delivers rapid print times; 0.20 mm gives an ultra-smooth finish across the top chamfered rim).
• Wall Loops: 3 to 4 loops (Ensures rigid, durable sidewalls and a weighted feel).
• Infill: 10% - 15% (Gyroid).
• Material: Matte PLA, PETG, or PLA+ (Forest Green, Burnt Orange, Slate Grey, or Matte Black produce a premium minimalist finish).